Repairing a Broken Resin Custom 3D Figure
Practical repair guidance for broken resin custom 3D figures, including clean breaks, small parts, glue choices, repainting, and prevention.
Published

A resin custom 3D figure is made for display, not rough handling. If a hand, prop, base, or small detail breaks, the right repair depends on how clean the break is and whether any painted surface was damaged.
Before ordering or replacing a custom 3D figure, use this repair checklist to decide what is practical.
Start by Saving Every Broken Piece
Do not throw away small fragments. Put every piece in a small bag or container, including loose props, fingers, accessories, and base parts. A clean original piece is easier to reattach than a remade replacement.
Check Whether the Break Is Clean
A clean break with two matching surfaces is usually repairable. A crushed or missing section is harder because it may need filling, sanding, and repainting. If the face is damaged, repair becomes more delicate.
Use Adhesive Carefully
For small resin parts, a small amount of cyanoacrylate glue can work, but too much glue can leave a visible seam or fog the surface. Test the fit before applying glue and hold the piece steady while it sets.
Know When Replacement Is Better
If the figure snapped through the face, hair, thin ankle, or detailed prop, a simple home repair may not look clean. In that case, contact the seller with clear photos of the damage and the original order information.
To reduce future damage, review resin and plastic material differences and custom figure material choices.
FAQ
Can I repair a broken custom figure at home?
Small clean breaks can often be repaired carefully. Complex breaks may need professional help or replacement.
Should I repaint after gluing?
Only repaint if the surface color is visibly damaged. Use a light touch so the repair does not draw more attention.
How can I prevent future breaks?
Keep the figure on a stable shelf, avoid dropping it, and choose practical poses with fewer thin unsupported parts.